Supported Devices

Below is a list of the devices that are supported by the OneTouch Reveal® web application as of the date of publication of this User Manual. You can transfer data from all of these devices and connection instructions are included in the table. This table also serves as a reference for the features and functions available for each supported device.

Device Generate Patterns Clear Device Time Synchronization Detect Future Dates Detect Mixed Dates Mac Connection Instructions
OneTouch Ping® Meter Remote X X X X   X Turn on; then connect.
OneTouch Select® X X X X X X Turn off; then connect.
OneTouch Ultra®2 X X X X X X Turn off; then connect.
OneTouch Ultra® X X X X X X Turn off; then connect.
OneTouch UltraLink® X X X X X X Turn off; then connect.
OneTouch UltraMini® X X X X X X Turn off; then connect.
OneTouch UltraSmart® X X X X   X Connect the meter to the cable; connect the cable to the PC, push the left black button
OneTouch Verio Flex™ X X X X X X Turn off; then connect.
OneTouch Verio®IQ X X X X X X Turn off; then connect.
OneTouch Verio® X X X X X X Turn off; then connect.
OneTouch Verio®Sync X X   X X X Turn off; then connect.
Animas® 2020 X     X X X Pump should be in standby; tubing not connected.
Animas® Vibe™ X     X X X Pump should be in standby; tubing not connected.
OmniPod®       X X X Ensure the OmniPod® Personal Diabetes Manager PDM is on and connect the device to your computer.
OneTouch Ping® X     X X X Pump should be in standby; tubing not connected.

System Requirements

To use the OneTouch Reveal® web application, your computer must have an internet connection speed of 256 KB/s or faster (high-speed or broadband internet connection). Your computer must also meet the requirements listed below. For devices not listed, please refer to the information provided by the manufacturer of your device.

Hardware Requirements

Software Requirements

The following must be installed on your computer:

The following must be installed to transfer patient device data: